Description
Heat Design Insert Stoves can be simply installed into a standard solid fuel fireplace opening, and can greatly increase the efficiency of your fire. Open fires can be as low as 20% efficient, with the majority of heat escaping up the chimney. Heat Design insert stoves can deliver efficiency ratings of up to 80%, meaning that you burn less fuel and deliver fewer toxins into the environment.
Models Available include the 4kW, 5kW & 7kW Insert Stoves.
FEATURES
- Reduces your carbon footprint
- Reduces heat loss up flue when unlit
- Full cast iron construction
- Airwash technology keeps glass clean
- Large ceramic glass door
- Easy removal for flue cleaning
- Fits existing 16” fireplace opening
- Also available in Enamel
- Overall size (WxHxD) 492mm x 598mm x 177mm
- Weight (kg) 87
- Output to Room 5kW/17,060BTU
- Efficiency 77%
- Fuel Type Wood or Solid Fuel*
- Flue Diameter 6” / 153mm
- Dimensions are approximate and are subject to change without prior notice. Please double check all measurements.
*Wood moisture content should be below 20% for optimum burning.
Guidance Note on Burning Solid Fuel / (Briquette Smokeless Fuel) Please be aware that some smokeless fuels (Solid fuel / Briquettes) may cause the inner surface of the stoves ceramic glass to turn cloudy or crystallise. This is caused by a reaction of some fuels during the combustion process due to excess sulphur in the fuels. Unfortunately the glass manufacturers will not warranty their products from this phenomenon. Regrettably this cannot be controlled or prevented by the stove manufacturer and therefore we cannot offer any warranty. There are no known safety issues, the only effect will be a visual one. Solid fuel requires air from underneath the grate which in turn reduces the effects of the secondary airwash. You will notice a dark grey haze on the back of the ceramic glass. It is important to clean this off the glass when the stove is cold using a stove glass cleaner. Repeated firing of the stove without cleaning the glass daily when burning solid fuel greatly increases the chances of glass turning cloudy / crystallising. To minimise this condition we strongly recommend burning well-seasoned or kiln dried wood logs using only the airwash controls only, (Primary air controls closed).
Additional information
| Weight | 87 kg |
|---|---|
| Dimensions | 49.2 × 17.7 × 59.8 cm |
| Fuel Type | Multi Fuel |
| Output | 5kW |
| Flue Size Ø | 153mm |
May require factory order.
Order today to reduce the wait!
