Heat Design San Remo Freestanding Stove 4kW

590

Description

Heat Designs San Remo range of multifuel stoves are ideal for burning wood, coal and peat. With their classic styling they offer both first-rate efficiency and durability. By combining the best in high temperature glass with combustion technology our San Remo stoves feature crystal clear glass, for better view of the flame.

Models Available include the 4kW, 6kW, 8kW, 12kW & 16kW Dry Stoves and 8kW, 12kW, 16kW, 25kW & 30kW Boiler Model Stoves.

FEATURES

  • Riddling system on all dry models
  • Inner cast iron combustion chamber
  • Primary and secondary air regulators
  • Full cast iron construction
  • Airwash technology
  • Large ceramic glass door
  • Top or rear flue outlet
  • Adjustable leg (for levelling only)
  • Ash pan with tool
  • Secondary burn technology increases efficiency
  • Overall size (WxHxD) 394mm x 540mm x 197mm
  • Weight (kg) 80
  • Output to Room 4.2kW/14,330BTU
  • Efficiency 76.6%
  • Fuel Type Wood or Solid Fuel*
  • Flue Diameter 5” / 127mm
  • Dimensions are approximate and are subject to change without prior notice. Please double check all measurements

*Wood moisture content should be below 20% for optimum burning.

Guidance Note on Burning Solid Fuel / (Briquette Smokeless Fuel) Please be aware that some smokeless fuels (Solid fuel / Briquettes) may cause the inner surface of the stoves ceramic glass to turn cloudy or crystallise. This is caused by a reaction of some fuels during the combustion process due to excess sulphur in the fuels. Unfortunately the glass manufacturers will not warranty their products from this phenomenon. Regrettably this cannot be controlled or prevented by the stove manufacturer and therefore we cannot offer any warranty. There are no known safety issues, the only effect will be a visual one. Solid fuel requires air from underneath the grate which in turn reduces the effects of the secondary airwash. You will notice a dark grey haze on the back of the ceramic glass. It is important to clean this off the glass when the stove is cold using a stove glass cleaner. Repeated firing of the stove without cleaning the glass daily when burning solid fuel greatly increases the chances of glass turning cloudy / crystallising. To minimise this condition we strongly recommend burning well-seasoned or kiln dried wood logs using only the airwash controls only, (Primary air controls closed).

San Remo Freestanding Stove 4kW Technical Manual

Additional information

Weight80 kg
Dimensions39.4 × 19.7 × 54 cm
Fuel Type

Multi Fuel

Output

4kW

Flue Size Ø

127mm


May require factory order.
Order today to reduce the wait!

For pricing & availability